Notice! If your computer is running Windows XP and can open a Command Prompt (MS-DOS) window in "full screen" mode, simply download the demo and double click the file: SetupProbelt6Demo.exe. You can test your system by going to Start - Run. Type: CMD and press OK. The Command Prompt or MS-DOS window will open. Press ALT-Enter keys at the same time. If you get a nasty message, your graphics video drivers are of the Windows 7 configuration that prevent "full screen" mode. Type: Exit and press Enter to close.
Call the phone number below or email the address below for any questions or assistance.
For Windows 7 and other computers, read the following special setup method:
Setup Details for Running PRO-BELT on Windows 7, 64-bit CPU, and Other Operating Systems.
Use the left mouse key to select the PRO-BELT commands and the right mouse key to reverse or return to the Main Menu. Use the cursor-sensitive HELP system by placing the cursor over the desired input cell and pressing the F1 - HELP key.
PRO-BELT is easy to use. Select the "Data Input" command and all sub-menus from the Main Menu. Review and change the input cells as desired. (NOTE! For demo purposes, some cells are "fixed" and cannot be changed. Next, select the "Analyze" command and all sub-menus to complete the design. Reports can be printed and data files saved.
Click our home page below for support information to print on network printers.
Notice! Use the Mozilla Firefox web browser if Internet Explorer gives a WinZip error message such as, "Cannot open file: it does not appear to be a valid archive."
Click to download the PRO-BELT demo.
Professional Designers & Engineers, Inc.
Kent R. Rieske, President
5086 Cottonwood Drive
Boulder, CO 80301 USA
|
|
Tel: 303
- 927 - 6937 |
|
